Slide and turn system SF30

• Standing slide and turn system
• Non-thermally insulated aluminum profiles with tempered safety glass
• The flush bottom track is particularly suitable for use in „Barrier-free dwellings“ according to DIN 18 025
• Panels can be stacked open either internally or externally
• Opening of panels by sliding to one side or to both sides
• Height variations can be compensated by a height compensation profile

• Resistance to wind load class A4 according to EN 12210 (Typ I)

• All fittings are concealed within the profiles
• Low-maintenance, non-corroding and failsafe fittings
• Inside and/or outside locking and unlocking possible
• Locking and unlocking via turning knob
• Optionally with lever lock (“child-proof”)

• The running assemblies consist of four vertically arranged rollers
• Low-noise, low-wear, heat and cold resistant running surfaces
• Running assemblies pivot at any angle between 90° and 180°

• Tongue and groove joint between the end caps
• Brush seals are used horizontally at the top and bottom, at the inside and outside
• Lower and upper brush gaskets are attached to the panel frames and not to the guide track

• 10, and 12 mm tempered safety glass panes (ESG-H)
• Panes secured via concealed screw-fixing system in top and bottom panel profiles  
• Subsequent replacement of panes without difficulty
• Subsequent replacement of panels without difficulty
   

• Unpressurised drainage via inclined floor construction
• Integrated water drainage channel on inside of bottom track
• End-caps for lateral sealing of bottom track

You can choose from a range of standard colours - and many, many more from the SUNFLEX colour wheel.

Our standard colours are:

• Standard surface in RAL standard gloss level, E6-EV1, DB703
• Standard surface in fine structure, DB703 FS, RAL 9016 FS, RAL 9005 FS, RAL 9006 FS and RAL 9007 FS