Slide and turn system SF25

• Frameless all-glass slide and turn system
• Option of flush or weathered bottom track
• The flush bottom track is particularly suitable for use in "Barrier-free dwellings" according
• to DIN 18 025
• Panels can be stacked open either internally or externally
• Opening of panels by sliding to one side or to both sides
• Optionally with or without lateral vertical frame profiles
• Height variations can be compensated by a height compensation profile

• Airborne sound insulation Rw = 22 dB according to DIN EN ISO 140-3
• Airborne sound insulation Rw = 34 dB according to DIN EN ISO 140-3 with gap gaskets
• Measurement of deflection class 3 according to DIN EN 12211/12210 (8, 10, 12 mm glass)
• Repeated pressure/wind suction class 3 according to DIN EN 12211/12210 (8, 10, 12 mm glass)
• Safety test class 3 according to DIN EN 12211/12210 (8, 10, 12 mm glass)

• All fittings are concealed within the profiles
• Low-maintenance, non-corroding and failsafe fittings
• Inside and/or outside locking and unlocking possible
• Locking and unlocking via pull rod or turning knob
• Optionally with lever lock (“child-proof”)

• Top running, maintenance-free horizontal running assemblies, each equipped with two rollers
• The running assemblies feature each three smooth-running needle bearings and two carbon fibre reinforced polyamide rollers
• Running assemblies out of stainless steel metal components
• Low-noise, low-wear, heat and cold resistant running surfaces
• Running assemblies pivot at any angle between 90° and 180°

• Gap of approximatively 2-4 mm between the panels
• PVC gap gaskets (optional)
• Brush gaskets are fitted horizontally at the top and bottom on the inside and outside
• Lower and upper brush gaskets are attached to the panel frames and not to the bottom track

• 8, 10  and 12 mm tempered safety glass panes (ESG-H)
• Panes secured via concealed screw-fixing system in top and bottom panel profiles
• Subsequent replacement of panes without difficulty
• Subsequent replacement of panels without difficulty

• Unpressurised drainage via inclined floor construction
• Integrated water drainage channel on inside of bottom track (option)
• End-caps for lateral sealing of bottom track

You can choose from a range of standard colours - and many, many more from the SUNFLEX colour wheel.

Our standard colours are:

• Standard surface in RAL standard gloss level, E6-EV1, DB703
• Standard surface in fine structure, DB703 FS, RAL 9016 FS, RAL 9005 FS, RAL 9006 FS and RAL 9007 FS