Slide and turn system SF35

• Framed slide and turn system
• Non-thermally insulated aluminum profiles with insulated glass
• Option of flush or weathered bottom track
• The flush bottom track is particularly suitable for use in "Barrier-free dwellings"
• according to DIN 18 025
• Panels can be stacked open either internally or externally
• Opening of panels by sliding to one side or to both sides
• Optionally with or without lateral vertical frame profiles
• Height variations can be compensated by a height compensation profile

• Airborne sound insulation Rw = 30 dB according to DIN EN ISO 140-3
• Measurement of deflection class 3 according to DIN EN 12211/12210 (20 mm glass(4/12/4))
• Repeated pressure/wind suction class 3 according to DIN EN 12211/12210 (20 mm glass(4/12/4))
• Safety test class 3 according to DIN EN 12211/12210 (20 mm glass(4/12/4))

• All fittings are concealed within the profiles
• Low-maintenance, non-corroding and failsafe fittings
• Inside and/or outside locking possible
• Locking and unlocking via user-friendly flat handle
• Turn panel may be equipped with a profile cylinder lock to prevent unauthorized opening

• Top running, maintenance-free horizontal running assemblies, each equipped with two rollers
• The running assemblies feature each three smooth-running needle bearings and two carbon fibre reinforced polyamide rollers
• Running assemblies out of stainless steel metal components
• Low-noise, low-wear, heat and cold resistant running surfaces
• Running assemblies pivot at any angle between 90° and 180°

• Tongue and groove system between the panels
• Brush gaskets are fitted horizontally at the top and bottom on the inside and outside
• Lower and upper brush gaskets are attached to the panel frames and not to the guide rail

• Insulated glass of 18 or 20 mm available, or 8-10 mm ESG-H
• Subsequent replacement of panels without difficulty

• Unpressurised drainage via inclined floor construction
• Integrated water drainage channel on inside of bottom track (option)
• End-caps for lateral sealing of bottom track

You can choose from a range of standard colours - and many, many more from the SUNFLEX colour wheel.

Our standard colours are:

• Standard surface in RAL standard gloss level, E6-EV1, DB703
• Standard surface in fine structure, DB703 FS, RAL 9016 FS, RAL 9005 FS, RAL 9006 FS and RAL 9007 FS