Deutsch
Portuguese
French
Italian
Dutch
Spanish
Danish
Chinese
Optimal panel guidance without guide arm when opening and closing
Slide and Turn System SF 25 with frame
System Information
- Framed slide and turn system
- Non-thermally insulated aluminum profiles with tempered safety glass
- Option of flush or weathered bottom track
- The flush bottom track is particularly suitable for use in "Barrier-free dwellings" according to DIN 18 025
- Panels can be stacked open either internally or externally
- Opening of panels by sliding to one side or to both sides
- Optionally with or without lateral vertical frame profiles
- Height variations can be compensated by a height compensation profile
- Airborne sound insulation Rw = 34 dB according to DIN EN ISO 140-3
- Measurement of deflection class 4 according to DIN EN 12211/12210 (8, 10, 12 mm glass)
- Repeated pressure/wind suction class 4 according to DIN EN 12211/12210 (8, 10, 12 mm glass)
- Safety test class 4 according to DIN EN 12211/12210 (8, 10, 12 mm glass)
- All fittings are concealed within the profiles
- Low-maintenance, non-corroding and failsafe fittings
- Inside and/or outside locking and unlocking possible
- Locking and unlocking via pull rod or turning knob
- Optionally with lever lock (“child-proof”)
- Top running, maintenance-free horizontal running assemblies, each equipped with two rollers
- The running assemblies feature each three smooth-running needle bearings and two carbon fibre reinforced polyamide rollers
- Running assemblies out of stainless steel metal components
- Low-noise, low-wear, heat and cold resistant running surfaces
- Running assemblies pivot at any angle between 90° and 180°
- Tongue and groove system between the panels
- Brush gaskets are fitted horizontally at the top and bottom on the inside and outside
- Lower and upper brush gaskets are attached to the panel frames and not to the guide track
- 8, 10 and 12 mm tempered safety glass panes (ESG-H)
- Panes secured via concealed screw-fixing system in top and bottom panel profiles
- Subsequent replacement of panes without difficulty
- Subsequent replacement of panels without difficulty
- Unpressurised drainage via inclined floor construction
- Integrated water drainage channel on inside of bottom track (option)
- End-caps for lateral sealing of bottom track
You can choose from a large number of colours on the SUNFLEX colour wheel.
