- Optimal panel guidance without guide arm when opening and closing
Slide and Turn System SF 30
System Information
- Standing slide and turn system
- Non-thermally insulated aluminum profiles with tempered safety glass
- The flush bottom track is particularly suitable for use in „Barrier-free dwellings“ according to DIN 18 025
- Panels can be stacked open either internally or externally
- Opening of panels by sliding to one side or to both sides
- Height variations can be compensated by a height compensation profile
- All fittings are concealed within the profiles
- Low-maintenance, non-corroding and failsafe fittings
- Inside and/or outside locking and unlocking possible
- Locking and unlocking via turning knob
- Optionally with lever lock (“child-proof”)
- The running assemblies consist of four vertically arranged rollers
- Low-noise, low-wear, heat and cold resistant running surfaces
- Running assemblies pivot at any angle between 90° and 180°
- Tongue and groove joint between the end caps
- Brush seals are used horizontally at the top and bottom, at the inside and outside
- Lower and upper brush gaskets are attached to the panel frames and not to the guide track
- 10, and 12 mm tempered safety glass panes (ESG-H)
- Panes width of up to 15 mm is possible
- Panes secured via concealed screw-fixing system in top and bottom panel profiles
- Subsequent replacement of panes without difficulty
- Subsequent replacement of panels without difficulty
- Unpressurised drainage via inclined floor construction
- Integrated water drainage channel on inside of bottom track
- End-caps for lateral sealing of bottom track
You can choose from a large number of colours on the SUNFLEX colour wheel.
Resistance to wind load class A4 according to EN 12210 (Typ I)