- Optional separate pass door available, as a single door or French-style doors
Horizontal Sliding Wall SF 40 H-S-W
System Information
- All-glass horizontal sliding wall
- Top hung construction consisting of individually sliding panels
- Panels open to the inside, outside or to the centre
- Opening of panels by sliding to one side or to both sides
- Optionally with revolving blind frame
- Height adjustment after installation possible
- All fittings are concealed within the profiles
- Low-maintenance, non-corroding and failsafe hardware components
- Elements are locked via a floor bolt
- An integrated pass through panel with a lever-operated multiple locking system, lock and profile cylinder can be provided
- Each element is guided by two running assemblies sliding in a ceiling mounted aluminium trackt
- Low-noise, low-wear, heat- and cold-resistant rollers
- Running assemblies pivot at any angle between 90° and 180°
- Vertical gap of approximately 3 mm between the panels
- Gap may be closed by fitting gap gaskets.
- Brush gaskets are fitted horizontally at the top and bottom on the inside and outside
- Lower and upper brush gaskets are attached to the panel frames and not to the guide tracks
- 8, 10 and 12 mm tempered safety glass panes (ESG-H)
- Panes secured via concealed screw-fixing system in top and bottom panel profiles
- Subsequent replacement of panes without difficulty
- Subsequent replacement of panels without difficulty
You can choose from a range of standard colours - and many, many more from the SUNFLEX colour wheel.
Our 5 standard colours are:
- RAL 9016
- RAL 7016
- RAL 9006
- RAL 9007
- E6EV1