Folding Door SF 75H

  • panel catcher for additional security to fix the pass door to the adjacent panel
  • recessed burglar resistant fittings
  • later height adjustment of the running mechanisms possible for example in case of construction lowerings
  • continous gaskets in the hinge area for optimal tightness between the panels
  • hinge bolt locking for optimal tightness and burglar resistance
  • proper Sunflex handle series

System Information

  • Glazed folding door made of three layers of laminated and bonded solid wood
  • The construction depth of the profiles is 75 mm
  • Panel open to the inside or outside
  • Opening of panels by sliding to one side or to both sides
  • Flush running and guide tracks
  • Height variations and expansions may be compensated
  • All fittings are concealed within the profiles
  • Low-maintenance, non-corroding and failsafe hardware components
  • Locking of panels in top and bottom track
  • Locking and unlocking of panels via flat handles with locking device for burglar resistance
  • Turn panel can be secured against unauthorized opening by a profile cylinder lockwerden
  • Hinges are secured against knocking-out of the pivot pins (burglar resistance)
  • An open turn panel may be securely fixed to the adjacent panel by panel catchers
  • An integrated pass through panel with a lever-operated multiple locking system, with profile cylinder and handle can be provided at the inside and outside
  • An integrated tilt or turn panel within a panel is optionally available
  • The running assemblies are located above the water drainage area
  • Low-noise, wear-, heat- and cold-resistant rollers
  • Using EPDM gaskets at two levels guarantees rain- and wind-proofness
  • A glazing configuration of up to 40 mm is possible
  • Fitting of the glass panes by wet glazing method
  • Subsequent replacement of panes without difficulty




You can choose from a large number of colours on the Sikkens colour palette.