SF 30

aluminium system

The SF 30 aluminium system is distinguished by slim profile widths whose vertical frames set stylish accents. In addition, they can be installed quickly and without extensive conversion measures. The enhanced protection against noise, dirt and effects of the weather is a key aspect.

Technical Details (Example SF 25)
  • height compensation profile allows a height adjustment of up to 22 mm
  • Completely new, rustproof carriage system fitted with triple smooth-bearing needle bearings
  • Arched intake guide
  • Panel guide for flush floor rail
  • Infinitely adjustable corner piece for ceiling rail
  • Adjusted profile end cap for height adjustment profile and ceiling rail
  • Carriage outlet including new gap ventilation
  • Height adjustment profile with flange
  • Screw cover with clip-on screen
  • Reinforced plastic pivot bearing
  • New panel profile end caps for 6, 8 and 10 mm including glass slide block mount and cover clip fixture
  • Infinitely adjustable corner piece for height adjustment profile
  • Turn knob with integrated tensioning mechanism for rope extension
  • Up to 90° angling possible from the second panel in polygonal systems

Profile system

  • Framed slide and turn system
  • Non-thermally insulated aluminum profiles with tempered safety glass
  • Airborne sound insulation Rw = 34 dB according to DIN EN ISO 140-3
  • Option of flush or weathered bottom track
  • The flush bottom track is particularly suitable for use in "Barrier-free dwellings" according to DIN 18 025 
  • Panels can be stacked open either internally or externally
  • Opening of panels by sliding to one side or to both sides
  • Optionally with or without lateral vertical frame profiles
  • Height variations can be compensated by a height compensation profile

Fittings

  • All fittings are concealed within the profiles
  • Low-maintenance, non-corroding and failsafe fittings
  • Inside and/or outside locking and unlocking possible
  • Locking and unlocking via pull rod or turning knob
  • Optionally with lever lock (“child-proof”)

Running assembly

  • Top running, maintenance-free horizontal running assemblies, each equipped with two rollers
  • The running assemblies feature each three smooth-running needle bearings and two carbon fibre reinforced polyamide rollers
  • Running assemblies out of stainless steel metal components
  • Low-noise, low-wear, heat and cold resistant running surfaces
  • Running assemblies pivot at any angle between 90° and 180°

Sealing and ventilation

  • Tongue and groove system between the panels
  • Brush gaskets are fitted horizontally at the top and bottom on the inside and outside
  • Lower and upper brush gaskets are attached to the panel frames and not to the guide track

Glazing

  • 6, 8, and 10 mm tempered safety glass panes (ESG-H)
  • Panes secured via concealed screw-fixing system in top and bottom panel profiles
  • Subsequent replacement of panes without difficulty
  • Subsequent replacement of panels without difficulty

Drainage

  • Unpressurised drainage via inclined floor construction
  • Integrated water drainage channel on inside of bottom track
  • End-caps for lateral sealing of bottom track