SF 40 H-S-W

This transparent all-glass system without vertical profiles on the panel edges consists of individual sliding panels which are not connected to each other. This makes it particularly safe to operate and virtually maintenance-free.

Profile system

• All-glass horizontal sliding wall
• Top hung construction consisting of individually sliding panels
• Panels open to the inside, outside or to the centre
• Opening of panels by sliding to one side or to both sides
• Optionally with revolving blind frame
• Height adjustment after installation possible

Fittings

• All fittings are concealed within the profiles
• Low-maintenance, non-corroding and failsafe hardware components
• Elements are locked via a floor bolt
• An integrated pass through panel with a lever-operated multiple locking system, lock and profile cylinder can be provided

Running assembly

• Each element is guided by two running assemblies sliding in a ceiling mounted aluminium track
• Low-noise, low-wear, heat-  and cold-resistant rollers
• Running assemblies pivot at any angle between 90° and 180°

Sealing and ventilation

• Vertical gap of approximately 3 mm between the panels
• Gap may be closed by fitting gap gaskets.
• Brush gaskets are fitted horizontally at the top and bottom on the inside and outside
• Lower and upper brush gaskets are attached to the panel frames and not to the guide tracks

Glazing

• 8, 10 and 12 mm tempered safety glass panes (ESG-H)
• Panes secured via concealed screw-fixing system in top and bottom panel profiles
• Subsequent replacement of panes without difficulty
• Subsequent replacement of panels without difficulty